Sale!
anabond 666 silicone sealant

Anabond 666 Silicone Sealant 310 grams New

790.00

  • Good Thermal stability, Excellent Mechanical properties
  • Good Dielectric properties, High Elasticity
  • Good weatherability and UV Resistance

Buy more Save more!

Quantity Price
1 - 24 790.00
25 - 49 750.00
50+ 725.00

FREE SHIPPING on all orders in India

  • Check Mark GST Invoice on all orders
  • Check Mark All prices are inclusive of GST
  • Check Mark 100% New & Original Products
  • Check Mark Worldwide shipping available
  • Check Mark Pay with Credit/Debit Card, Netbanking, Wallet & UPI
GUARANTEED SAFE CHECKOUT
  • Stripe
  • Visa Card
  • MasterCard
  • American Express
  • Paytm Logo

Description

Anabond 666 Silicone Sealant HSN:3214

Anabond 666 is a single component, non-slumping, low odour, low volatile silicone adhesive/sealant. It is designed to provide reliable “formed-in-place” gaskets for mechanical assemblies where high temperatures are experienced. The material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. It has good adhesion to substrates like aluminum, mild steel, glass, ceramics, corks and many plastics.

This is a universal gasket maker and it meets every sealing need in automobile engine, timing covers, oil sump applications, valve covers, rocker covers, water pumps, end seals, intake manifolds and rear axle housings. This product is also used as sealant and adhesive for assembly and repair of industrial furnaces, ovens, boilers, exhaust stacks, high temperature ducting and heating elements in electrical appliances.
 

Anabond Single part RTV(Room temperature Vulcanizing) Silicon systems are ready to use, that cures as resilient silicon rubber at room temperature. These are versatile products which find immerse use in all kinds of industries, offering exceptional properties. It can be used as a adhesive, sealant, F.I.P Gasket.

Anabond 666 Silicone Sealant Features :-

  • Good Thermal stability, Excellent Mechanical properties
  • Good Dielectric properties, High Elasticity
  • Good weatherability and UV Resistance
  • Color: Clear Packaging: Cartridge

Anabond 666 Silicone Sealant Application :-

  • Automotive Industries : Used as F.I.P(Form in place) Gasketing sealant for engine assembly such as oil pan, Transmission covers, water pump mounting etc.
  • Aircraft Industries : Used as gasket Sealing, Ducting, Vibration, Dampers
  • Construction Industries : Used for glass glazing, window perimeter joints, wash basin, bathtub sealing, A/c Duct sealing etc.

Curing performance 
The product cures on exposure to moisture in the air, typically developing a skin within minutes, becoming tack free within minutes to hours. After skin formation, cure continues inward from the surface. Optimum physical properties are reached after curing for 7 days at
55±5% RH. The rate of surface/depth cure depends on the relative humidity and temperature of the environment thickness of the adhesive and the area under the joint Curing time is extended at lower humidity levels.
Curing tested at 30 ± 20C, 55 ± 5% RH

Operating parameters for Anabond 666 silicone sealant

  • Application temperature ⁰C 10 to 40
  • In service temperature ⁰C -50 to +250
  • Short exposure ⁰C 275

Directions for use
Substrate preparation
Surfaces to be adhered or sealed should be free of dirt, oil and other contaminants. For best performance clean the surface with a solvent such as isopropyl alcohol acetone or methyl ethyl ketone or with coarse lint free cloth. A surface primer is recommended for hard to bond surfaces, such as some plastics. Apply a thin coat of primer after cleaning the surface with solvent, and allow drying for 5 to 10 minutes at room temperature. Note that the adhesive may not show adhesion to polyethylene, polypropylene, polyacetal or Teflon.

Method of application
Adhesive/sealant can be applied directly from its collapsible tube or extruded from its cartridge. A plastic nozzle is supplied which can be cut to the desired orifice and shape to facilitate application. Apply a continuous bead of adhesive/sealant to prepared surface in a uniform thickness. If spreading is required, use enough pressure to spread the adhesive/sealant and displace any trapped air The adhesive/sealant bead size to be specified is a function of anticipated gap size for the part and the flange width. Consult Anabond representative for equipment supplier and design recommendations.

Dispensing
The product can be dispensed using a manual dispensing gun, Pneumatic dispensing gun or customized dispensers. While using pneumatic
dispensers, the product should be dispensed using 1 or 2 bar pressure. For information on appropriate dispensing equipment, please contact Anabond.

Storage
The optimal storage condition is 8°C to 30°C. Storage below or more than the temperature specified, has impact on the product properties.
Material removed from containers may be contaminated during use. Do not refill the product to the container. Sealant cures by moisture. Keep the container tightly closed when not in use. A plug of cured material may form in the tip of tube or cartridge, which can be easily removed and will not affect the remaining contents.

Shelf life
When stored at or below 300C, in the original unopened containers, this product has a shelf life of 18 months from the date of manufacture.

Product Documentation: Click Here.

Shop more products from Anabond: Click Here.

 

Additional information

Country of Origin

India

Brand

MPN

666-CLEAR-310G

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.